Episodes

  • Suddenly there were 700...

    Suddenly there were 700...
    Nov 23 2024
    Foundations of Amateur Radio Thirteen years ago I opened my mouth to express my thoughts on what to do with an amateur license after hearing an operator complain they needed more power to talk to a station across 600 kilometres, whilst I used the same 10 Watts to communicate with a station nearly 15,000 kilometres away. In all, I've shared my thoughts some 700 times, documenting my journey though this majestic hobby, describing what I've been up to, reporting my successes and failures, sharing my observations and making recommendations. I've built projects and attempted to start new processes, I've encouraged, cajoled, on occasion berated or applauded as I found it. Throughout the experience I've attempted to build this wonderful community, to inspire and to grow it. Sometimes I might even have succeeded. I could not have done this without you. So, thank you. If I haven't mentioned your name or responded to your email, it's not because I didn't see your contribution. You have delighted me and lifted me up and I thank you for sharing your thoughts. At this point you might wonder if I'm hanging up my microphone and to that I say: No, not even close. Instead I'm continuing with this experiment, rough and ready though it is. It occurs to me that over the years I've started a great many projects and documented them as they happened, either here, or on my vk6flab.com website, or on GitHub. These projects take time and effort that go beyond what you encounter here. Sometimes it's hours, sometimes it's weeks. Recently a lot of my musings have been about things I've wanted to do, rather than describing things that I've done. Mind you, not for lack of desire. I want to try something different. I'm going to, at least for the next little while, bring you along with a project as I'm building it. No doubt I'll get distracted by squirrels along the way, but I'm going to attempt to build something for us as a community, for amateur radio, because I want to actually do something, rather than talk about it and I need to manage my limited resources and this way I get to build something and you get to have me sharing my thoughts. From my perspective, win-win. So, let's dive in. Amateur radio is a hobby that takes all kinds. A lot of activity is curtailed by money, or rather, lack of money. That doesn't have to be the case and I think I can show you how. That's not to say that this is going to cost nothing, but you can likely start with what you already have and work your way up as your budget allows, rather than require a significant outlay just to get your toes wet. Over the past few weeks I've been talking about a toolkit called GNU Radio. It can be used to build systems that can process data, like say radio signals which come in all shapes and sizes. You can start by connecting an antenna to a sound card and use that as a radio tuner. You can also use a sound card as a way to listen to signals coming in via the Internet, or a radio you might already own. Sound cards exist in most computers but can be purchased for around $10. If you want to handle more data, you can spend $50 and use an RTL-SDR dongle. This incremental path continues. You can build a digital radio, or buy a learning kit, or something else, all the while still being part of the same ecosystem. I want to build a system where you can experiment with radio without needing to buy new hardware every time you want to try something new. I want it to work with a sound card as well as with the latest $7,000 radio you can get shipped to your door. I want to do this in such a way that we can start to embrace all that is possible within the realm of software. Ultimately I want to be able to use any signal source anywhere and GNU Radio seems ideally suited as the tool for the job. I envisage that we'll build a distributed system, where signal processing and the signal itself don't have to be in the same spot, which is useful for a whole host of reasons, even though it increases the level of complexity by at least an order of magnitude. This isn't going to be easy. It's not going to be working tomorrow, perhaps not even a year from now and as long as new radios are invented, it will never stop, but we'll see how it goes. For example, I spent a week attempting to install GNU Radio on my Macintosh, asked two expert groups and got nowhere. In stark contrast, I installed it on my Linux Debian workstation and the example I tried worked out of the box. In other words, plenty of obstacles to overcome. Before I go, I'll make this explicit. I want this to be open source, so anyone can play. I haven't yet decided on which specific license to use, but I'm cognisant that there are many large companies making obscene amounts of money from the volunteer efforts of the open source community and as one of the volunteers, I'd like to be able to pay for food and a roof over my head. I expect and appreciate your feedback, so don't be shy. I'm Onno VK6FLAB
    Show more Show less
    5 mins
  • Why does your Wi-Fi connection drop out when cooking lunch?

    Why does your Wi-Fi connection drop out when cooking lunch?
    Nov 16 2024
    Foundations of Amateur Radio Have you ever attempted to download an email attachment, or watch a streaming service whilst your microwave was cooking lunch or dinner and noticed that something odd was happening, or is my asking that question the first time that you joined the dots? This phenomenon is not by accident, though it isn't on purpose. In 1947 the International Telecommunications Union, the ITU, was meeting in Atlantic City where the "delegate of the United States, referring to his request that the frequency 2450 Mc/s be allocated for I.S.M., indicated that there was in existence in the United States, and working on this frequency a diathermy machine and an electronic cooker, and that the latter might eventually be installed in transatlantic ships and airplanes. There was therefore some point in attempting to reach world agreement on this subject." Several things to unpack there. It's 1947 and experimentation is happening at 2,450 Mega-Cycles per second, what we call megahertz today; you might recognise the frequency as 2.45 GHz. At that time, experiments using radio frequencies for medical purposes has been in full swing for decades. Nikola Tesla wrote a paper on the subject that was presented in absentia to the American Electro Therapeutics Association in 1898. In 1947, a diathermy machine exists; today its used to aid with blood flow, muscle and joint pain as well as inflammatory and degenerative bone disease. There is a working electronic cooker, a microwave oven to you and I, and whilst the one you could buy in 1947, a Raytheon "Radarange", if you forked over $5,000, or $70,000 in today's money, had space for a 2 meter tall, 340 kilogram, 3 kilowatt behemoth, you have to admire the imagination that one day this would fit on an aeroplane to travel the world, let alone be available for $100 at your local supermarket. One other thing, I.S.M. or Industrial, Scientific and Medical is a concept we still use today. The idea being that there are uses for radio waves that are nothing to do with communication, like microwave ovens, steel smelting through induction heating, surgical uses like cauterising wounds, some cancer treatments and plenty more. One of the ideas behind ISM is that equipment operating in those frequencies must tolerate any interference generated by ISM applications. The other part of the ISM idea is that it's unlicensed, which is very attractive to people who experiment and why it became popular for other uses beyond heating your lunch. Consider that baby monitors, garage door openers, car security systems, video senders, cordless phones, wireless speakers and microphones, cordless keyboards and mice, radio controlled models, and smart power meters all share the same radio frequencies. Then there's Wi-Fi, Bluetooth, and Zigbee, also using the same 2.4 GHz ISM band. Yeah, even the two most popular network technologies on your phone and computer, Wi-Fi and Bluetooth are competing with each other and the microwave oven in the kitchen. There are six global ISM bands and six additional ones with specific local requirements. Things like industrial microwave ovens, Near Field Communications or NFC and LoRaWan use frequencies like that. You'll also find satellite communications, radio location, CB radio, radio astronomers and radio amateurs on those bands. So, why are these technologies sharing the same frequencies? Essentially because they're unlicensed spectrum. Just so we're clear, this doesn't mean that it's unregulated spectrum. All it means is that unlike licensed spectrum, you don't need to buy access to the spectrum to use it, but you do need to have compliant equipment when you do. Compliance depends on local laws, location, band and power levels. So, next time you need to watch a movie whilst cooking lunch, eat an apple or go outside and get some daylight onto your skin instead. A quick word on power. Whilst all these uses share the same frequency band, their human impact varies considerably. A Wi-Fi network uses a tenth of a Watt. A diathermy machine uses 250 Watts and produces a "gentle heat" at the surface of the skin, suitable for treatment. Contained inside a metal box, a microwave oven uses 1,000 Watts or more. Even that doesn't cook food from the inside out, instead it vibrates water molecules in the food, which heat up, which in turn cooks the food. It doesn't penetrate very far and doesn't work on frozen water, which is why you need to defrost your food before you can cook it. It's also why when you stand between your Wi-Fi router and the computer things slow down, or why your hand position on your phone or tablet can make a difference, since your body, made from 60% water, is blocking the signal. Finally, here's something to consider. A licensed radio amateur has access to some ISM bands, but does it require an amateur license to actually use any of those bands? In other words, if my amateur license doesn't permit my access to 2.4 or 5.8 GHz bands, ...
    Show more Show less
    7 mins
  • A new radio every week ...

    A new radio every week ...
    Nov 9 2024
    Foundations of Amateur Radio The hobby of amateur radio is one of experimentation and change. For decades this came in the form of circuit diagrams, components and scrounged hardware from anything that wasn't bolted down. New functionality came with the aid of a soldering iron. More recently, functionality comes from participation in the global electronics market where you can buy any radio you like and have it shipped to your door within hours at an unbeatable price. Mind you, buying all those unbelievably cheap radios does start adding up and if you want to use more sophisticated hardware, that too is possible, at a price, somewhere between $50 and a new Porsche. Whilst that's an option for some, for the rest of us, there are better and cheaper ways. Of course it doesn't stop there. If you connect any radio to a computer, you can use whatever software you like to encode and decode any signal you can imagine. With a traditional radio connected to a computer you can make it participate in hundreds of different so-called digital modes. Before I continue, let's look at radio in a slightly different way. Consider an antenna as a continuous source of voltages that are amplified, filtered and demodulated in some way by a radio. You can think of the combination of antenna, radio and computer as a stream decoder. To decode a signal in a new way requires a new decoder, which you could build from components or as I've said, buy online. During the week I've continued experimenting with GNU Radio. If you're unfamiliar, it's a toolkit that allows you to build so-called flow graphs that can process a signal stream. Think of it as a box of Lego that you can put together to build any type of decoder. Let me say that again. Imagine that you want to decode or transmit a mode like FreeDV, M17, APRS, Olivia, Contestia, or Hellschreiber. With the GNU Radio toolkit, all of this is possible and you won't need to buy new hardware or bust out the soldering iron every time you want to experiment with a new mode. If you have been playing with digital modes already, you'll likely point out that you can already do this today by using software running on a computer, and that's true. What that doesn't tell you is that this comes with a very specific limitation, namely that all those modes require that they fit inside a single audio channel because all those digital modes you might be familiar with are essentially using an SSB or FM signal with the audio generated or decoded by a computer. Even if you have a modern radio like for example an ICOM IC-7300, you'll still be limited in what modes of transmission you can make. ICOM limits the transmit bandwidth to 2.9 kHz. Flex Radio appears to double that to 7.9 kHz, but numbers are sketchy. The point remains, most current amateur radio technology is based around the notion that a mode essentially fits within a single audio channel and a very narrow one at that. So, why does this matter? If you run out of FT8 space on a band, right now you need to change to an alternate frequency to play, but you'll only be able to see the stations that are using the same alternate frequency, as long as they fit within the bandwidth of an audio signal. If you wanted to check out the main frequency, you'd have to change frequencies and keep switching back and forth. Using this idea, monitoring all of FT4, FT8, WSPR and all CW beacons, all at the same time becomes unimaginable, not to mention costly if you needed a radio for each band and each mode. What if you wanted to use another mode that took more than about 4 kHz, like say a 5 MHz wide DVB-T signal which you could be experimenting with on 70cm? Or, what if you'd like to compare a repeater input with its output at the same time? Or compare two repeaters together? Or find the best band to operate on right now? The point being, that there are things that simply don't fit within a single audio channel that you won't be able to play with using a traditional radio. As it happens, that too is a solved problem. Remember that I mentioned that you can think of an antenna, radio, and computer combination as a stream decoder? What if I told you that an SDR, a Software Defined Radio, is essentially a device that translates antenna voltages into numbers which you can process with GNU Radio? Whilst that does imply replacing your radio, you don't have to jump in at the deep end to start playing and even if you do decide to buy new hardware, you can get your toes wet with all manner of self build or commercial kits. Even better, you can start with the gear you already have today and become familiar with GNU Radio and when you're ready to expand your station, you can add in an SDR and continue to use the same tools to experiment. Not only that, you can do interesting things by combining what you already have. Consider for example the idea of using an RTL-SDR as the receiver with a traditional radio as the transmitter. You could decode all of the ...
    Show more Show less
    6 mins
  • Unexpected miracles ...

    Unexpected miracles ...
    Nov 2 2024
    Foundations of Amateur Radio Over the past weeks, actually, probably more accurately years, I've been carrying around an idea. It's been bubbling away and I've been trying very hard to make it solidify into something that I could explain and then hopefully attack. Today I woke up with a hunger to do some radio and ultimately tell you about it. To get to a point where my Aha! moment emerged, I need to provide some history. Traditional radio activities involve variations on a radio plugged into an antenna with the operator talking into a microphone or torturing a Morse key. If you want to operate digital modes, you essentially have two choices. You can use a rare radio with in-built digital modes or, more commonly, connect a computer to the radio via an audio interface, which essentially replaces the operator with a computer. This implies that the radio is physically connected to the computer and in the same room. What if you don't want either? There's another aspect to this. Modern SDRs or software defined radios, tend to use the network to get information from the antenna to the user. The network can transport the radio signal, but also control signals, to change things like frequency and mode, and if the radio supports it, bands, antennas and other fun stuff like filters. There are ways to control a traditional radio across the network with so-called CAT commands, or Computer Assisted Tuning. This same technology can be used to connect a logging tool, so it knows what frequency and mode to log when you make a contact. What CAT control lacks is audio. Said differently, although some solutions exist to send Morse code, you cannot use CAT to listen to the radio, or speak into a microphone. This isn't an issue if the radio and you are in the same room, but if they're not, then things get tricky. And as a final piece of background information, a traditional radio is based around audio, that is, the information going between you and the radio, or a computer and the radio, is limited to audio. This represents about 4 kHz of signal. In other words, if you're tuned to 28.500 MHz, then a traditional radio can "hear" the radio signal between 28.500 and 28.504 MHz, sufficient for a single audio signal, but even a simple digital radio, a $50 RTL-SDR using a USB cable, can handle 2.4 MHz, plenty to cover all of the 10m band between 28.0 and 29.7 MHz with room to spare. I've been looking for something, anything, that brings these two vastly different worlds together for a number of reasons. I've spoken previously about some of these. For example, I do not want to physically connect my traditional radio, a Yaesu FT-857d, to my computer because I do not want to have the potential of stray RF coming into my computer. I'd also love to be able to run the same decoding and control tools for various radios, the Pluto SDR, several RTL-SDR dongles, my 857 and other radios as they come into my shack from time-to-time. Then there's the signal processing side of things. I'd love to be able to learn how to decode Morse and eventually other modes using a computer. I also want to be able to use a voice-keyer during a contest so the whole house doesn't ring from the sound of me calling CQ Contest, or CQ DX for hours on end. I've been making inroads into this. I managed to get rigctld to work across the network using Docker containers at both ends. I attempted to get audio working, but that has so far been a dismal failure, despite assistance on several fronts. This morning I stumbled on the idea of using "GNU Radio" for both. I even came across some examples where two so-called "flow-graphs" can talk to each other across the network. Now at this point you're either going to be nodding your head, or you're going to be asking yourself what gibberish I just spouted. If you're already nodding your head, stand-by, if not, GNU Radio is a software toolkit that provides signal processing blocks that you can link together to create simple or sophisticated systems to manipulate signals, like those that come from radios, or radio telescopes, or mobile phone base stations, radar, ADS-B, or whatever else you can imagine. It's widely used in academia, government, industry, research, and of course by us, hobbyists. A collection of blocks and links is called a flow-graph and in essence it's a program or if you like, an App, that you can run. It comes with a tonne of examples and tutorials, including one where one flow-graph can manipulate another, either on the same computer, or somewhere on the Internet. What this means is that you could build a flow-graph that can talk to a Yaesu FT-857d and one that can talk to a Pluto SDR, or an RTL-SDR, or any other radio, and use that to talk to a flow-graph that understands how to deal with audio, CAT and anything else you might want to. It means that for the first time in years I can at least imagine a unified world where my 857 isn't a boat anchor when compared to my Pluto SDR. Of ...
    Show more Show less
    7 mins
  • The venerable QSL bureau

    The venerable QSL bureau
    Oct 26 2024
    Foundations of Amateur Radio One of the oldest global aspects of our hobby, other than actually using the radio, is the QSL bureau. It uses a postcard-like system to confirm that two stations made contact, sent via the postal service as a so-called QSL card. Of course, that only works if you have each other's address which after World War II was somewhat difficult. As a result the QSL bureau was born. Intended as a single point of contact for a country, a local QSL bureau consists of one or more volunteers, paid staff or contractors, who act as the distribution point for incoming and outgoing QSL cards. If you and I agreed to confirm our contact via the bureau, my QSL card to you would be sent to the VK outgoing QSL bureau, which would hold my card until there were sufficient outgoing cards from all over Australia to your country to package them all up and send them to the incoming QSL bureau in your country. Your QSL bureau would then wait until there were enough QSL cards for your region to send it on, where it would eventually get into your hands in a variety of ways, via the postal service, through your local club, or at a local hamfest where the QSL bureau might have a stall. Your QSL card to me would make a similar, reverse, journey. This process could take weeks or sometimes years. Although not fast, this worked for many decades, but once electronic communications and computers started appearing, combined with increased costs associated with privatised international postal services, the wheels started coming off. Getting access to historic documents has proven challenging. I can tell you that over the years the IARU, the International Amateur Radio Union, has coordinated and controlled how the QSL bureaus should work. For example, a resolution adopted in 1985 and updated in 2009 "strongly encouraged" its member societies to accept incoming QSL cards for all amateurs in their country, regardless of affiliation. It also instructed QSL bureaus to only send cards to the official QSL bureau if there was more than one. Several years ago, the IARU administrative council recognised several trends, among them the environmental impact of unwanted cards generated in bulk by computer logging software, lower levels of adoption and ultimately the closing of some smaller QSL bureaus after being overwhelmed by undeliverable cards from increasingly popular holiday DXpeditions. In September 2018, the IARU adopted resolution 18-1 that stated that it "resolves that member societies are encouraged to continue to offer QSL bureau service in their countries, exchanging cards with the bureaus of other member-societies, for as long as doing so is economically justifiable, and further resolves that amateurs are encouraged to adopt confirmation practices, including but not limited to using electronic confirmation systems, that reduce the volume of unwanted and undeliverable QSL cards being introduced into the bureau system." This resolution took effect on New Year's Day, 2019. I'll also note that the IARU has its own year 2000 issue, having been in existence for nearly a century, its resolutions are named after the last two digits of the year followed by a sequential number, so resolution 25-1 could refer to 1925 or 2025, but I digress. The internet has introduced several confirmation processes. The most vocal of these is "Logbook of The World", or LoTW. I'm not a fan and haven't been for some time. I'll get into why in a moment. Other contenders are eQSL.cc, qsl.net, qrz.com, clublog.org and others that have yet to steal the limelight. If I've forgotten the one you run, let me know. Saying that I'm not a fan of LoTW is understating it. Recent ARRL ransomware payments aside, why do I need to legally prove beyond a reasonable doubt that I made contact with some random amateur? Why does this need to be authenticated, signed with a time-limited certificate and verified with 100 points of identity and why do we continue to roll out new and interesting procedures for what is essentially a postcard saying that on this day, time and frequency we made contact using this mode for the purposes of .. wait for it .. our hobby? The eQSL website has an interesting statement: "One of the problems with an e-mail based system is that there is no security inherent in that mechanism. Anyone can purport to be P5ABC, and you'll have a difficult time verifying it." So what .. and what made you think that the postcard ending up in your letterbox was guaranteed to be from P5ABC? If you're going to the effort of pretending to be P5ABC, what harm does that do in the scheme of things? For that matter, how do you know that the station you talked to on-air was actually P5ABC? I ask because I've spoken to an amateur who recently did some HF direction finding during several popular DXpedition pile-ups. They discovered that there were several stations purporting to be the DXpedition that were not. So. Right now we're in a situation where ...
    Show more Show less
    8 mins
  • Amateur Radio connects you in unexpected ways

    Amateur Radio connects you in unexpected ways
    Oct 19 2024
    Foundations of Amateur Radio

    One of the unexpected benefits of this hobby is how it provides you with the ability to connect to others in ways that are not directly related to radio.

    Take for example Steve. Steve appears at unpredictable times and locations, been hunted by citizens and scientists and unlike Steve's potential invisible cousin, the proton arc, has been photographed by aurora hunters many times. It looks like observations go back as far as 1705.

    In 2017, physics professor Eric Donovan saw some of these photos and got curious. Assisted with GPS coordinates from an aurora hunter in Alberta, Song Despins, Eric correlated the time and location and it turns out that Steve was observed as a ribbon of gas 25 kilometres wide, 300 kilometres above Earth with a temperature of 3,000 degrees Celsius by the European Space Agency's Swarm, a constellation of magnetic field measuring satellites in orbit since 2013 and planned as a four year mission, so-far it has almost managed eleven years.

    Steve? Yeah, it's not named after Steven Hawking or Steve Martin, rather, if you're seeing something unexplained, you might name it something less scary, like the hedge in the movie "Over the Hedge". Steve was given a backronym, finding words after the fact, Strong Thermal Emission Velocity Enhancement, but I prefer Steve. The NASA team at Goddard Space Flight Center have adopted Steve, so it looks like a keeper.

    I would never have even stopped to read the recent article in the local news, let alone dig into the various publications, if it weren't for the notion that Steve is one of many phenomena affecting the ionosphere and with it our hobby.

    Here's another example.

    Vance KV4P published a plan on kv4p.com, outlining a $35 project that requires minimal soldering that makes any Android phone into a handheld radio for 2m. Using a radio module, a micro-controller, a short USB cable, antenna connector, antenna and some sticky gel pads, Vance has come up with an open source project and circuit-board design that will get you on your way. He's even designed a 3D printable enclosure so you don't have to scare your friends with a bare circuit board.

    Whilst the Android app is in beta, that is, not quite fit for human consumption, you'll need to drop an email to Vance to get in on the action. Source code is on GitHub.

    I came across this project after breakfast, reading the "Y Combinator - Hacker News" which features all manner of weird and wonderful projects, links and questions from all over the technology sphere. The post has expansive discussion on Vance's project, including thoughts on other ideas on how to do interesting things related to our hobby.

    Again, if it weren't for the fact that I'm already an amateur, I would never have taken more than a glance at this and I would never consider that this was a doable project, let alone discover other amateur radio projects like HamWAN and AREDN, or the Amateur Radio Emergency Data Network.

    The point being that we as amateurs are often pigeonholed by society into the idea of obsolete, disconnected and quaint. I'm here to tell you that our hobby has made me more alive than ever, more connected to others around me, more observant to electrical and physical phenomena and if that makes me quaint, I'm Okay with that.

    Also, while we're on the topic of being Okay. Charles NK8O reached out and told me that after listening to me talk about FT8 and his Morse code achievements, he cracked up and then raised the stakes by pointing out that you can get on HF with CW, that's continuous wave, or more commonly, Morse Code, for about $100, where a kit capable of SSB, Single Side Band, or more generally audio, will likely set you back significantly more. His advice, which I cannot fault, "Get on the air!", presumably to make some noise.

    I'm Onno VK6FLAB
    Show more Show less
    4 mins
  • Surprising ideas that change you forever

    Surprising ideas that change you forever
    Oct 12 2024
    Foundations of Amateur Radio

    Every now and then you come across an idea that throws you for a loop. It comes seemingly out of nowhere and once you've seen it, you cannot unsee it. It's a lot like a 1929 painting I like called "The Treachery of Images", also known as "Ceci n'est pas une pipe", or in English, "This is Not a Pipe" by Belgian surrealist painter René Magritte. If you're not familiar with it, it's a painting of a pipe, and by being a painting, it's not a pipe. Obviously.

    Before I go into the idea that rocked my world, I need to set the stage a little.

    There are several modes I've discussed before, WSPR, or Weak Signal Propagation Reporter, FT8 or Franke-Taylor design, 8-FSK modulation and plenty others.

    Each of these modes has one thing in common. They require that all participants are using the same time. That is, both sender and receiver need to agree on when "now" is for this to work.

    A WSPR signal takes 110.6 seconds, every 120 seconds, starting on the even minute. It requires that the transmitter and receiver agree on the time within about 2 seconds.

    An FT8 signal takes 12.6 seconds within a 15 second window. It requires an accuracy of about 20 milliseconds.

    These timekeeping requirements are pretty easy to achieve in a modern network connected computer. You turn on a thing called NTP, or Network Time Protocol, point it at an appropriate clock and off you go.

    If you're not connected to the Internet, then things get squirrelly pretty quickly. You could buy yourself a GPS, set up a link between the GPS and your computer, run some software and use the GPS clock to synchronise time on your computer.

    Of course, this requires a GPS, a serial cable, software, configuration, battery power to keep the GPS running and probably a couple of other things. I've never done this, but given what I'm about to share, I don't think I ever will.

    What if you used a WSPR, or an FT8 signal, from someone else to synchronise your clock? If you've ever launched WSJT-X, you'll have seen a column marked DT, that's Delta Time, or the difference in time between the clock on your computer and that of the transmitter.

    If you could read the difference and use it to adjust your clock, you'd be in business.

    Charles NK8O pointed me to a GitHub Gist with a single little Python script, written by Peter K6PLI. It updates the clock on your computer using the Delta Time from WSJT-X.

    I'd point you at the script from here, but 3a730575, and 24 more characters, and that's just one element of the URL, doesn't run quite off the tongue, so I've cloned it into my VK6FLAB GitHub repository where it's called wsjt-time-sync. I added Peter's description to the ReadMe file, but I can take no credit for the effort, or the idea, that's all Peter.

    So, synchronise your clock using the signal that you're trying to decode. Seems pretty obvious now, but that was a brand new notion for me.

    Of course now I'm excited and wondering where else I might use this.

    Let me know if there's more to this that tickles your fancy.

    Also, just because I know Charles will poke my eye out with a Morse key if I don't mention this, you could use this script on your next POTA, Parks On The Air, or WWFF, World Wide Flora and Fauna activation, or anywhere else you go portable to make some noise.

    I know, right, Charles, using FT8 instead of Morse Code, what's next, the end of the hobby? I'll tell you a secret. From time to time, he even uses his voice!

    I'm Onno VK6FLAB
    Show more Show less
    4 mins
  • What does an actual minimal set-up look like?

    What does an actual minimal set-up look like?
    Oct 5 2024
    Foundations of Amateur Radio

    The other day I was packing the car to go on a little trip an hour out of the city to see the Milky Way. I briefly entertained the idea of bringing my radio gear with me to get on air to make some noise.

    I resisted the urge, mainly because thinking about this didn't fill me with joy, rather it made me groan.

    Now to be absolutely clear, I adore going out into the scrub with my radio gear. I love getting on air and making noise. I like doing this with friends.

    If the time spent is about amateur radio, in other words, if I'm doing this with other amateurs, preparation and set up are part of the experience.

    However, if I'm on my own, or with my non-amateur SO, significant other, then preparation and set up often take more time than the actual on-air activity and by the time that things are humming along, we're ready to do something else, fine food, nice view, coffee, you name it, anything other than radio.

    So, how can I make the preparation and set up to be something much less time consuming? I don't really want to take over our car and bolt the radio back into it, nor do I want to strap a multi-tap antenna to the roof. At the other end, I also have no desire to bring a wire, look for a tree, do some throwing, find a place to sit and do the rest of the preparation to get on air.

    In other words, I want my cake and eat it too.

    What might that look like?

    One of my fellow amateurs has a telescopic whip, looks like a transistor radio antenna on steroids, but using that requires that you bring something to tune it, given that the ground is going to influence the antenna in unexpected ways.

    I could go out and buy a QRP radio with an in-built tuner, make the whip as long as it goes, perhaps even make it into a vertical dipole by combining two and start playing, but I'm not there yet.

    Of course I'm not the first to try any of this. The Parks On The Air and Summits On The Air activators are all over this type of activity, hopefully they've written some of their learnings down. I confess that I haven't found anything yet.

    How much of this have you achieved? What compromises did you make, what modes do you use when you're operating like this, mind you, I can hear my friend Charles NK8O from here, "Use Morse Onno", so I can take that as a given.

    All I need to do is learn it.

    I'm Onno VK6FLAB
    Show more Show less
    2 mins